ASTM A36 Steel Plate is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.
A105 is an ASTM steel forging specification mainly used for carbon steel forged piping components. This type of carbon steel forging alloy involved is a low carbon, manganese and silicon containing steel similar to AISI 1330, but with lower manganese content.
C60R is a non-alloy steel with many excellent properties and a wide range of applications. It is a type of carbon spring steel with excellent metallurgical quality (high coating degree and uniformity) and good surface quality (strict control of surface defects and demoulding). After heat treatment or cold drawing heat treatment, C60R obtains extremely high strength, hardness, elasticity and appropriate toughness and plasticity. With the same surface condition and complete hardening, C60R is also suitable for tool manufacturing, showing its applicability in tool and mold manufacturing. This strength and range of applications make it one of the most important materials in industry.
20MnCrS5 is an alloy steel material that specifically belongs to the carburizing steel category and has good mechanical properties and wear resistance. Its chemical composition includes elements such as carbon, silicon, manganese, phosphorus, sulfur and chromium. The presence of these elements increases the hardness and strength of the steel, and also gives the steel a certain degree of wear resistance and corrosion resistance. Therefore, 20MnCrS5 is widely used to manufacture important parts such as high-strength gears, bearings and transmission components. In addition, this material has a wide range of applications in the industrial field, including railways, bridges, various construction projects, etc., and is used to manufacture various metal components that bear static loads, as well as mechanical parts and general welding parts that do not require heat treatment.
S45C Steel Grade is one steel grade material in JIS G4051. which is standard specification of carbon steels for machine structural use. Specifically, this is standard for heat treatable steels, alloy steels and free cutting steels.
JIS S45C Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. JIS S45C machinery steel are usually supplied as square bar, or round bar or flat. JIS Steel S45C is excelling in weldability & machinability , and S45C steels can be subjected to various heat treatments.
C45E+N steel is a medium carbon engineering steel with excellent performance. It is suitable for manufacturing mechanical parts that are subject to high loads and impacts, especially those parts that require superior mechanical properties and surface hardness, such as connecting rods, bolts, gears and shafts. Its performance can be further improved through appropriate heat treatment.
Steel C45R is suitable for mean loaded parts in vehicle, engine and machine engineering with enhanced workability at constant mechanical qualities (e.g. transmission shafts, gear wheels, clutch parts, bolts). Lowest application temperature -25°C. As a bright steel product it is used in the form of bars, bright, straight, in various conditions.
SAE 1045/AISI 1045 Carbon Steel is a medium carbon steel which is characterized by good weldability, good machinability, high strength and impact properties in either the normalized or hot forged condition.
SAE 1045/AISI 1045 steel is widely used for axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods etc.
Steel C35R is suitable for slightly higher loaded parts in vehicle, engine and machine engineering with enhanced workability at constant mechanical properties (e.g. transmission parts, crank shafts, cylinder). Lowest application temperature -25°C.
SAE1020 steel is a high-quality carbon structural steel that is usually used directly in the supplied state without heat treatment. Its advantages include high cost-effectiveness, good machinability, good welding performance and good formability. SAE1020 steel is widely used in mechanical parts, automotive parts, structural applications, fasteners, hand tools and equipment, agricultural equipment, pipes and tubes, and bicycle frames.
SAE4340 is a high-strength, low-alloy steel known for its outstanding toughness, strength and fatigue resistance, and is particularly suitable for applications such as aerospace, oil and gas, and the automotive industry. This material has excellent mechanical properties and wear resistance, and is often used to manufacture high-strength, high-wear-resistant parts, such as crankshafts for aircraft engines and gears for automotive transmissions. The development trend of SAE4340 steel focuses on improving material properties and production process improvements, while paying attention to environmental protection and sustainable development. This alloy steel plays an important role in the fields of aviation, automobiles, and energy due to its excellent performance and wide application prospects.
655M13 is a low alloy steel containing chromium, molybdenum and nickel. It is commonly used in the aerospace and defense industries for applications such as gears, shafts and aircraft landing gear components. 655M13 has high strength, good ductility and excellent toughness, making it suitable for high stress environments. It is typically supplied in the normalized and tempered condition for easy welding and machining.
SCM415 Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon. SCM415 whose surface are processed through carburizing hardening treatment are used for the parts which need high toughness or wear resistance, such as cylinder piston, crankshaft, gears, pin, shafts and so on.
5CrNiMo steel is a hot work die steel with good toughness, strength and high wear resistance. Use vacuum refining technology when melting to ensure the high purity of steel, and professional heat treatment is used to obtain the best pre-hardening effect and uniform hardness distribution of the steel.
Mold Steel 5CrMnMo is developed on the basis of medium carbon steel by adding three elements of Cr, Mn, Mo. The steel is a hot work die steel with slightly poor hardenability and thermal fatigue resistance. Steel is suitable for various types of forging dies with high strength and high wear resistance.When higher toughness is required, electro slag remelting steel can be used.
